Victor Class Reference

#include <Victor.h>

Inheritance diagram for Victor:

List of all members.

Public Member Functions
	Victor (UINT32 channel)
	Victor (UINT8 moduleNumber, UINT32 channel)
virtual void	Set (float value, UINT8 syncGroup=0)
virtual float	Get ()
virtual void	Disable ()
virtual void	PIDWrite (float output)

---

Detailed Description

IFI Victor Speed Controller

---

Constructor & Destructor Documentation

Victor::Victor

(

UINT32

channel

)

[explicit]

Constructor that assumes the default digital module.

Parameters:

channel

The PWM channel on the digital module that the Victor is attached to.

Victor::Victor	(	UINT8	moduleNumber,
		UINT32	channel
	)

Constructor that specifies the digital module.

Parameters:

moduleNumber	The digital module (1 or 2).
channel	The PWM channel on the digital module that the Victor is attached to (1..10).

---

Member Function Documentation

void Victor::Disable

(

)

[virtual]

Common interface for disabling a motor.

Implements SpeedController.

float Victor::Get

(

)

[virtual]

Get the recently set value of the PWM.

Returns:

The most recently set value for the PWM between -1.0 and 1.0.

Implements SpeedController.

void Victor::PIDWrite

(

float

output

)

[virtual]

Write out the PID value as seen in the PIDOutput base object.

Parameters:

output

Write out the PWM value as was found in the PIDController

Implements PIDOutput.

void Victor::Set	(	float	speed,
		UINT8	syncGroup = 0
	)		[virtual]

Set the PWM value.

The PWM value is set using a range of -1.0 to 1.0, appropriately scaling the value for the FPGA.

Parameters:

speed	The speed value between -1.0 and 1.0 to set.
syncGroup	Unused interface.

Implements SpeedController.

---

The documentation for this class was generated from the following files:

• Victor.h
• Victor.cpp